Download the Windows BUTT 1.14 program from here: [Click Here to Download]

Download the Mac BUTT 1.14 program from here: [Click Here to Download]


Once you have downloaded the program, install it and run it. It will bring up a window that will look similar to this:

Click on the Settings Button which will bring up this window:

The Name field you can input whatever name you choose, this is sorting option, because you can have multiple servers saved in this broadcasting utility, so name it something that will you will remember that this your server for Gremlin Radio.

On the Main Tab under Server click Edit:

  • Make sure you have Shoutcast, and not IceCast selected at the top.
  • The address field will contain:
  • The port field will contain: 8012 (This is our test port, this will not be the port # for your show, we will give you that after we have run a test, and it will be either 8000, 8002, 8004, 8006, 8008, 8010)
  • The password field will contain: grlive
  • Now click the save button, and the window will close.


Click on the Audio Device tab and select the soundcard that your input audio is going to. (this is the soundcard that you have connected audio cables from your mixer to computer with)

Back on the settings window click on the Stream Tab which will look like this:

  • Audio Device (This should be set to your soundcard you broadcast with. We recommend using a external Soundcard for easier setup. [Behringer]
  • Set your Bitrate to 128k.
  • Set your Samplerate to 44100Hz.
  • Set your Channel to stereo.
  • Set your Codec to mp3.

You will not use the other fields. Here is a Summary Image of everything we have gone over thus far:


If you have entered the above information correctly you are now set to broadcast using this tool (B.U.T.T.).

You should be able to play some music and get visual feedback from the VU meter on the main window of the program. If you are not getting feedback from the VU meter, then either you have not selected the correct soundcard, or you have a setting in your soundcard settings that is hindering it from receiving audio.

If you are not getting feedback from the VU meter, I would suggest first selecting a different soundcard to see if you have selected the wrong soundcard, if you are sure you have the correct soundcard selected you will need access your soundcards settings make the correct adjustments there.

If you are getting feedback from the VU meter you simply need to:

To start the stream, you simply click on the (play) button.


If you want to do a sound check solo without help you can go to

This page will look like this:

Now go to your BUTT program hit the play button and refresh the page and it will change to look like this:

Now hit the Listen button in the menu bar and it will download a PLS. file that you can open via phone or PC. See screenshot below.

To stop the broadcast either click on the (stop) button or close the program.

You do not need to input any information in the Stream Infos: field on the Main tab for Gremlin Radio because that information is configured by our broadcasting software, don't concern yourself with that section as it has no affect on anything.


Because we use the rotating port system, you need to connect to your stream a few minutes before your show (roughly 5-10 minutes), if you do not do this, and you connect either right on time or late, our broadcasting software might not see you connected in time, and it will play archives and/or individual tracks instead of your live show during your allotted time slot.

If something ever happens like you arrive late for your show, you get disconnected for too long for some reason, you can still play your slot. The server will continue looking for your show throughout your time slot.

Always remember to disconnect and shut down your broadcasting software(s) after your show. If you don't the next person who uses your port number will not be able to broadcast or it plays silence over the airwaves, neither are desirable.



Download the Windows OBS program from here: [Click Here to Download]

Download the Mac OBS program from here: [Click Here to Download]


Once you have downloaded the program, install it, run it and open the program It will bring up a window that will look similar to this:


Click on the Settings Button which will bring up this window:

Input the above info including the Stream key which is connected directly to our GremlinRadio Live Youtube page.


Input your audio setting depending on how you stream.


When you show starts you can hit the Start Stream tab on the home page and it will automatically pop up on our “HOME” page at the top. If you previously had the page open you will need to refresh.


Social Site Instructions:

“The Gremlins”:

This site is for the Gremlin Radio “Dj’s, administrators and promoters” only.

This site is here to provide a private communication between all above parties while they share their port numbers, contact information, questions, technical issues, etc.

Don’t Post: Demos, Mixes, Promos, or outside Dj’s stuff. If you have any items in this category please post them on our Gremlin Radio (FAN) Page so our fans have access to you and your stuff.

Do not add anyone to this page. We will add and delete as dj’s come and go!

“Gremlin Radio (LIKE) Page”:

This page is dedicated to all of the true fans / true listeners of "Gremlin Radio". This place will be our fans "one stop shop" to receive your daily Gremlin updates.


Post need to be Gremlin Radio related.
When making initial post in the Gremlin Radio Like Page; post as Gremlin Radio and then you may comment to that post as your Dj Name.
The location to switch between names is at the top of the page directly under FACEBOOK and it states this "You are posting, commenting, and liking as Gremlin Radio — Change to __ [Your DJ Name] __"

Gremlin post will also link direct to our twitter if you keep your post under 140 characters. Twitter requires a 140 maximum.

Pin Post is a feature on the group page that all dj’s may use. This feature will only be used to “PIN” your post for your show only and during your show time only. After your show is complete please un-pin your post so the next dj can pin post his show information. You do this by hovering your mouse over the top right hand side of the post. Once you see an arrow, click on it one time and the will be a drop down arrow that “PINS and UNPINS” post.

Gremlin Radio

The Best In Club Breaks & More

Current track